Beneteau Beneteau Oceanis 311 Clipper Yacht Boat for Sale

• Manufacturer: Beneteau
• Location: Nr Gibraltar Spain
• Year: 1998
• LOA: 32'2" (9.80m)
• Beam: 11' 6'' (3.50m)
• Berths: 6
• Draft:
• Keel: Fin keel
• ID no.: 073282

• Cabins: 2
• Heating: Eberspacher
• Heads: 1
• Showers: 1
• Watertank Size: 200 Litres
• Engine Make: Volvo Penta 2020
• Horsepower: 18hp
• Drive Type: Shaft drive
• Fuel Type: Diesel
• Fuel Tank Size: 70 Litres
• Cruise Speed: 5
• Top Speed: 7
• Engine Hours Port: 1200

Broker Remarks

'Bruca', Beneteau Oceanis 311 Clipper, 1998 build to a 1999 model year. The Beneteau Oceanis 311 is a comfortable modern cruiser with good accommodation a high specification and excellent sailing characteristics, well prepared and maintained by diligent owners. Lying Nr Gibraltar Spain. Viewings by appointment.

Owner Remarks - This Beneteau Oceanis Clipper 311 was bought in Southampton in autumn 2011 and sailed to Gibraltar during 2012. She has spent the summer cruising the east coast of Spain and Ibiza before returning to Gibraltar. Three previous owners from new have all maintained and cared for the boat. All relevant detailed documents and invoices and all instrument instruction manuals are present. She is in excellent condition and ready to sail away.

Accommodation

Forward cabin with double berth sprung mattress - New 2012

Storage locker and hanging lockers

Through door to saloon with two bench settees - Recovered 2012 Storage below can be used as two single berths, 2 x lee cloth fitted

Central dining table

Chart table

Door to owner’s large double berth aft cabin with storage and hanging lockers

Heads to starboard

Engine access under companionway, storage lockers to port and starboard

Galley:

L Shaped galley to port with 2 burner plastimo Neptune gas stove with grill and oven, Fridge, cutlery drawer and under sink storage

Heads:

Hot and Cold pressurised fresh water

Sea Toilet - Replaced 2009

Shower

Hand wash basin storage above and under sink

Wet locker storage (boots jackets etc)

Mechanical and Rigging

Construction:
Beneteau Oceanis 311 Clipper
Built by Beneteau in 1998 (as a 1999 model) to a Group Finot design
GRP hull, deck and superstructure
Slef draining cockpit
Fin keel

**Last survey - November 2011 (all matters raised rectified)**

**Lower hull re-painted and anti-fouled professionally in 2012**

Inventory

Deck Equipment:
Bow roller
15Kg Rocna anchor and40m of 8m chain and warp - New 2012
South Pacific 900m electric windlass - New 2012
Fenders and mooring warps
Spray hood - New 2012
Helm and pedestal cover - New 2012
Full cockpit covers - New 2012
Starboard lockers
Teak laid cockpit seating
Gas bottle locker
Helm seat drops for ease of access
Removable Cockpit table
Remote control for windlass on pedestal at helm
Stainless steel pushpit and pulpit
Stanchions and twin guard rails
Boat hook
Dingy
Outboard engine bracket
Swimming ladder

Navigation Equipment:
Raymarine ST4000+ Autopilot at helm
Raymarine e7 GPS chartplotter on binnacle
B&G wind speed and direction.
Masthead windex and anemometer - Replaced 2009
B&G speed log depth
Simrad waypoint GPS repeater
Plastimo compass - New 2012
Navigation lights
VHF ICOM 411 with DSC
JRC Radar
AIS Receiver - New 2012

Safety Equipment:
Seago 4 man Life raft serviced until 2013
Flare storage container with 6 flares - Expires 2014
Manual and electric bilge pumps
Offshore Danbuoy with light buoy
Throwing line
Harness strong points in cockpit
Jack stays
3 manual 1 x automatic fire extinguishers - New 2012
Fire blanket
2x smoke alarms
1x gas alarm
Sea anchor
Brittany Anchor
Emergency tiller

Other Equipment:
Clock and Barometer