- Manufacturer: Unclassified
- Location: Conwy Marina
- Year: 1974
- LOA: 23'9" (7.24m)
- Beam: 7' 1'' (2.16m)
- Berths: 4
- Draft:
- ID no.: 072641
- Engine Make: Honda
- Drive Type:
- Fuel Type: Petrol
Broker Remarks
The Boat was purchased 2007 and has been berthed at Conwy for the duration. She has been antifouled with International micron extra, and been fully refitted in 2006/7. She has been polished and cleaned out and ready for the season.
Accommodation
Four berths provide two 6ft. 6in. quarter berths in the main cabin, and vee berths with an infill cushion to convert to a double berth in the forecabin. The galley, with a GAZ double burner stove, lies between the quarter berths and the main bulkhead. Water is pumped to the galley from a flexible water tank in the forward cabin by Whale galley pump. Stowage is provided beneath both galley units.
Mechanical and Rigging
The hull is a one piece GRP moulding of exceptional strength for the size of craft. Only Lloyds approved materials are used. The weight of glass fibre used in the basic construction ranges from 9.6 oz/sq.ft in the topsides increasing to 25 oz/sq.ft at the keel. Over almost the entire hull two layers of woven glass fibre rovings totalling 5.4 oz/sq.ft are included in the construction giving immense strength with minimum weight. The GRP keel is further massively reinforced by the lower part of the accomodation moulding which forms the top skin of a sandwich: the filling consisting of a resin/glass mix, and in this area the keel is upwards of 2 1/2 inches thick.
1 Honda 5 hp 4 stroke 2006/7 ( approx 10 hrs use ) with 25 liter fuel tank.
Alloy mast and boom with slab reefing
Stainless standing rigging
Running rigging ( new 2006 )
Adjustable back stay
Mail sail
Furling genoa
Spinnikar
Spare Jib
Inventory
Navigation light
VHF Radio
Boat Hook
Fenders
Warps
Anchor chain and warp
Disclaimer : The company offers the details of this vessel for sale but cannot guarantee or warrant the accuracy of the information contained in the specification or warrant the condition of the vessel or equipment. A buyer should instruct his agents, or surveyors, to investigate such details as the buyer desires validated. This vessel is offered for sale subject to no prior sale, price change, or withdrawal without notice.
